Categories
Ammunition

Federal Nyclad Ammunition in .38 Special to be Reintroduced at 2009 SHOT Show

Federal Premium Ammunition will be re-introducing the Nyclad in .38 Special at the 2009 SHOT Show according to the folks at the Pro Arms Podcast.  During a show on “snub nosed” revolvers, one of the participants made the announcement.

federal_nyclad_38The Nyclad line of ammunition was developed several decades ago and became popular as one of Federal’s self-defense lines of cartridges.  The .38 Special self-defense load was a 125 grain, standard pressure round that featured a soft-lead bullet with a very deep hollow point.  The bullet was coated in a jacket of polymer, similar to nylon, that allowed the bullet to reliably expand all even low velocities.

Many experts feel the 125 grain Nyclad hollow point was the best standard pressure cartridge loaded for the .38 Special.  It offered excellent expansion with a relatively light recoil in even the lightest of revolver frames.  My own informal testing seemed good out of a model 642 Smith and Wesson (1 7/8″ barrel), and Evan Marshall’s research tended to show good results in the street.

Until Federal confirms or denies this information, it is merely a juicy rumor at this point.  I have seen a lot of people snap up the remaining old-stock of Nyclad whenever it has shown up at AmmoMan and other places.  I suspect it will sell very well if re-introduced.

Update

Update: Federal did re-introduce the Nyclad.  Scroll down for additional information from the SHOT Show.

The re-introduced Nyclad is a .38 Special load that uses a 125 grain hollow point bullet.  The load is rated at 830 fps, which is in line with the original Nyclad load.  Federal designed this load for reliable expansion at low velocity.  While it would not be my first choice for personal protection, it is a great choice for anyone who carries a .38 and needs a low recoil load due to injury or infirmity.

Check out this video showing how well this load performs in gel through the denim test.

http://youtu.be/z730DvvRyd8

Report from the SHOT Show

Federal Premium Ammunition  re-introduced the Nyclad in .38 Special at the 2009 SHOT Show.  Available only in .38 Special, the Nyclad round is a standard-pressure, self-defense load with a nylon clad 125 grain soft lead hollow point.  The nylon coating allows the bullet to reliably expand at low velocities, unlike traditional copper jacketed hollow points which normally require faster velocities in the .355-.357 bullet size range.

The .38 Special loading pushes the 125 grain hollow point at 830 fps for a muzzle energy of 191 ft-lbs.  While this may not seem like a real “manstopper,” keep in mind that the Nyclad proved to be excellent in its class.  For a firearm not designed to handle +P pressures, or for someone that is especially recoil sensitive (such as someone who is arthritic), this is a mild recoiling cartridge that will reliably expand.

The Nyclad line of ammunition was developed several decades ago and made its way into one of Federal’s self defense lines of cartridges.  The original .38 Special self defense load was a 125 grain, standard pressure round that featured a soft-lead bullet with a very deep hollow point.  It appears that the new Nyclad ammunition will be a close copy of the original.

Many experts feel the 125 grain Nyclad hollow point was the best standard pressure cartridge loaded for the .38 Special.  It offered excellent expansion with a relatively light recoil in even the lightest of revolver frames.

Categories
news

Smith and Wesson 442 and 642 | No Locks!

Two of the most popular Smith and Wesson handguns, the models 442 and 642, have been re-introduced without the infamous internal locks.  These J-frame snubbies are the classic blued and stainless steel .38 Special revolvers with the internal hammers.

Perfect for pocket, ankle, and other forms of concealed carry, these revolvers have been great sellers for Smith and Wesson for many years.  Like all S&W revolvers, in recent times, a consumer could only buy these with the internal lock.  Unfortunately, these locks have had a few problems and consumer confidence in them is very low.  Smith and Wesson have listened to their customers and brought these two classic J-frames back without internal locks.

If you have been wanting one of these sidearms, but have hesitated, wait no longer.

I am a proud owner of the model 642-1 that I bought more than 10 years ago.  It is a great gun!  I have carried it daily in a pocket and on an ankle.  It has always performed perfectly and is very accurate.  I have no doubt these new models will be outstanding revolvers.

Update

Smith & Wesson updated the 442 and 642 line with “Pro Series” models.  The difference:  they do not have locks – the same as these revolvers.  Here is what I wrote on the new Pro revolvers when they were announced in December 2009: